This fully integrated industrial Unitized CNC plasma system features a Hypertherm EDGE Connect TC controller paired with your choice of Hypertherm’s conventional Powermax125 or MAXPRO200 plasma cutters or HyPerformance HPR or X-Definition XPR plasma cutters.
The Victory Unitized CNC plasma system is available in any size from 5’ x 10’ to 8’ x 20’ in either water table or down draft configurations. The work table has a structural double frame with a welded 3/16” walled tub built on a W4x13 frame to withstand the hazards of the industrial environment. Heavy ‘T’ guide rails, helical gear rack with 2” steel rollers on the rail axis combined with dual linear slides on the cross axis make a smooth and accurate guide system.
The motion drive system consists of three 400-watt fully synchronized brushless Yaskawa AC servo motors riding on pneumatic pre-loaders which drive direct-coupled precision gearboxes. One 400-watt and two 750-watt servos are used on systems 8′ wide.
All Victory-Hypertherm systems use only Hypertherm software.
Systems start at $129,700 with MAXPRO200.
Unitized system features & options
Work Table
3/16” walls |
W4x13 frame |
Water or downdraft |
Infinitely adjustable water level |
Gantry
Fabricated steel with dual 25mm linear guides running on unitized ‘T’ rails |
Gear Rack
.75 x 1” helical teeth |
Controller & Drives
Hypertherm EDGE Connect TC controller w/19″ touch screen |
Joy stick with soft & hard buttons |
Quad-core processor |
3 X 400 watt Yaskawa brushless AC servos on systems less than 8’ wide |
2 X 750 watt & 1 X 400 watt Yaskawa brushless AC servos on systems 8’ wide and wider |
Three emergency stops with EtherCAT communication |
Direct drive planetary gear boxes |
Hypertherm Software
Phoenix CNC cutting software |
64-part shape library |
Cutting charts |
ProNest® CNC |
Optional ProNest® office PC |
Optional True Hole® (requires HyPerformance plasma & AutoGas) |
Plasma Marking (requires ProNest® & Autogas) |
Power Chain
11” IGUS (fully-enclosed) |
Standard Features
Integrated automatic torch height control |
Torch collision protection |
Hypertherm Phoenix CNC |
ProNest® and oxy-fuel software |
Plasma Options
MAXPRO200 |
HPR400 |
XPR 170 or 300 |
Equipment Options
Pronest® PC with True Hole® (True Hole® requires HyDef or X-Definition plasma with Auto Gas Control) |
ProNest® Office PC |
1 x CNC oxy-fuel torch |
3/4 HP CNC drill |
SnapLoc straight-line bevel |