AutoGas: Hypertherm high-def and Thermal Dynamics standard-def Auto-Cut plasma cutters come with a manual gas control, which means your operator will have to manually select the gases used for cutting. This isn’t an issue if you cut the same material type and thickness on a regular basis. If you constantly change material type and thickness, AutoGas saves your operator time and cuts down on human error by mixing the gases automatically. Your operator selects the material type and thickness and the controller mixes the gases automatically.
Integrated pipecutter: we add a well to the interior side of the cutting bed, which allows you to cut pipe from 2” to 12” in diameter and in lengths up to 45’. The integrated pipecutter allows you to index the pipe while cutting.
Outboard Cutting: the gantry can be extended over the side of the table for cutting objects on stands.
Manual bevel: we offer a straight-line manual bevel head. With this option your operator rotates the torch head to a predetermined angle, makes the cut, then resets the torch head manually for the next cut. This is perfect for making linear cuts with angled edges. We are working on an option for a full-contour beveler.
Oxy-fuel torch: We offer a Victor oxy-fuel machine torch with manual ignition as well as a two-stage oxy-fuel torch with an electric ignition. Depending on the system, the torch will be mounted on the plasma lifter or on an independent lifter.