Victory CNC Plasma Systems is an original equipment manufacturer (OEM) of industrial CNC plasma cutting systems. We proudly build all our CNC plasma systems here in the US and we support everything we sell.

Unitized systems feature cutting areas from 5’ x 10’ to 8’ x 20’. Our gantry systems are available in sizes up to 20′ x 100′. Available options include AutoGas, pipe cutting, oxy-fuel cutting, drilling, full contour 5-axis plasma bevel, and straight-line plasma bevel.

We offer systems with Hypertherm’s standard-definition Powermax or MAXPRO200 or high-definition HyPerformance family and XPR family of plasmas. Hypertherm’s excellent EDGE Connect controller, torch height controllers, True Hole®®, AutoGas, ProNest®®, ProNest®LT®, RotaryTube® and Design2Fab® HVAC software are also available.

Our CNC plasma systems are complete and turn-key. They include (as standard equipment) all the ‘extras’ our competitors charge you for: automatic torch height control, automatic torch collision protection, helical planetary drive gear boxes, pneumatic pre-tensioning and emergency stop switches located where they should be. Our plasmas and controllers are installed and tested prior to shipment. We ship and install complete systems that are ready for production while other manufacturers try to finish their system on your factory floor.

All our installations include on-site training at no extra charge. Our CNC plasma systems feature remote login for training or troubleshooting so we can help you any time. Our service technicians are available via telephone and Internet for technical support, diagnostics, and service assistance. We offer field service as required, in or out of warranty.

Victory TS

Light Duty CNC Plasma Cutting System

The Victory TS is a light-duty CNC plasma cutting system based on Victory’s regular heavy-duty industrial systems. The dual-side drive system is constructed of 10-gauge steel and features a welded tub with a gantry mounted solidly on top. It is a complete, turn-key unit with the controller and plasma are installed and tested.

Features

  • Hypertherm EDGE Connect
  • 10ga walls
  • C4 Frame
  • Water or downdraft work table
  • Adjustable water level
  • 4′ × 8′ & 5′ × 10′
  • System page

 

Victory Unitized Plasma System

Water Table and Downdraft Configurations

Victory Unitized CNC plasma systems have a structural double frame work table with a welded 3/16″ walled tub built on a W4x13 frame. Heavy ‘T’ guide rails, helical gear rack with 2″ steel rollers on the rail axis combined with dual linear slides on the cross axis make a smooth and accurate guide system.

Features

  • 3/16″ walls
  • W4 Beam Frame
  • Water or downdraft work table
  • Adjustable water level
  • Hypertherm EDGE Connect.
  • 5′ × 10′ to 8′ × 20′
  • System page

Victory Rail & Gantry Plasma System

Available in any size from 5’ x 10’ to 10’ x 30’

Victory Rail & Gantry systems include True Hole, which was designed from the ground up to give you the best possible plasma-cut hole. Each of our industrial CNC Rail Systems are built in house and ships complete, with plasma cutter and controller installed and fully tested prior to shipment.

Features

  • 3/16″ walls
  • W4 Beam Frame
  • Water or downdraft work table
  • Adjustable water level
  • Buyer-built work table option
  • 5′ × 10′ to 10′ × 30′
  • System page

Victory Bridge Plasma System

Fully Integrated Industrial CNC Plasma System

The Victory Bridge system are completely integrated from top to bottom and feature all Hypertherm components, software, and True Hole. Standard features include integrated automatic torch height control, torch collision protection, laser locator, full motion Phoenix software, and a minimum of three 750-watt servos.

Features

  • 1/4″ Walls
  • W6 Beam Frame
  • Water or downdraft work table
  • Adjustable water level
  • Buyer-built work table option
  • 5′ × 10′ to 20′ × 100′
  • System page

Ready to see more? Check out our product line or get a quote.